Meet the wheel with unmatched strength that delivers unprecedented weight savings. Alcoa have taken another 5 pounds out of the 22.5" x 8.25" Alcoa Ultra ONE™ Wheel with MagnaForce™ alloy so each wheel is just 39 pounds. The result? Improved freight efficiency from a wheel that saves you nearly another 100 pounds per rig, so you can haul more every time you hit the road. And that's a nice lift to your bottom line.
Even after hundreds of washes and thousands of miles, Alcoa Dura-Bright® wheels maintain their shine.
And, because Alcoa Dura-Bright® Technology is a surface treatment not a coating, it won't chip, crack, peel or corrode. And never needs polishing. No other manufacturer can offer you that. You can't say that about coated wheels, which scratch, filiform corrode and discolor in commercial applications. Only Dura-Bright® wheels use a patented surface treatment that penetrates the aluminum and becomes an integral part of the wheel. And, they are the only wheels that come with a five-year limited warranty against defects in materials, workmanship and corrosion.
Now your wheels can look their best with less effort than with any previous steel or aluminum wheel. So, you save money and time and still hit the road with good-looking wheels on your trucks and trailers.
Along with faster, easier cleaning and maintenance, you get all the advantages you've come to expect from Alcoa aluminum wheels, including:
less weight for increased payload and greater fuel efficiencybetter heat dissipation for extended tire and brake lifehigher resale value (historically up to $1,500 on trucks with regular Alcoa aluminum wheels--Alcoa Dura-Bright® wheels may result in even more)one-piece, forged-in strengththe widest selection of wheels and wheel accessories in the industryLeave it to the company that invented the first practical aluminum truck wheel in 1948 to come up with Dura-Bright® wheels, the next revolution in wheel maintenance.
TR554D valve stem included and pre-installed with each aluminum wheel purchase!
Please note this is Alcoa part number ULA18X, which replaces ULT39X at the same specifications.
Specifications
| Specifications |
Measurement |
| Product Part Number |
ULA18x |
| Wheel Size (in) |
22.5" x 8.25" |
| Mounting System |
Hub Pilot |
| Bolt Holes |
10 |
| Bolt Circle |
285.75mm |
| Bolt Hole Diameter |
26mm |
| Hub Bore |
220.1mm |
| Approx. Weight (lbs) |
39 lbs |
| Outset (in) |
6.6" |
| Inset (in) |
5.81" |
| Max Load (lbs) |
7400 lbs |
| Max Cold Infl. (psi) |
130 psi |
| Valve Stem |
TR554D |
